Navigation


 

Categories



NDT
 

 

 

MARINE DIVISION


ANODES


BRAKE LINERS

Brake Liners

 

Description                  : The " Trimat " material is extensively fitted as original equipment and replacement spares on winches and cranes.

" Trimat " Asbestos - Free Woven Breake Linings are established as the quality leader for marine applications.

 

*Note        : Available in wide range of widths and thickness, the material can be supplied in rolls or cut pieces and is sutaible for fixing by bolts, screw rivets or bonding.


CHARTERING S&P

CHARTERING S&P


COUPLINGS


DRYDOCKING & SHIPREPAIR

This activity is carried out by two Group Companies; Nautilus International (India) in Mumbai and Caribbean Trading Co LLC in Sharjah UAE.


Nautilus Bombay is the oldest and most professional Shiprepair Yard Agent in India, having been in representation since 1974. Caribbtrade is the only Professional Shiprepair Yard Agent in the Middle East.

Please contact the following personnel for enquiries and details of worldwide shiprepair yard representation

In India - nautilusin@nautilusweb.com
Mr. Bhasskar Modi - Cell: + 91 98 211 35512
Dilip Tambe - Cell: + 91 98 334 11490

In the UAE - safetyshj@caribbtradeuae.com
Johnson Rappai - Cell: + 971 50 6346 718


FIBER GRATINGS


HATCH COVER RUBBER PACKING


HOSES & FITTINGS


LSA & FFA


MARINE COATINGS

Nippon Marine Paints


NDT

NDT


Oil & Chemical Spill Kit


SEALS & GASKETS


SHIPREPAIR

SHIPREPAIR


Spare used crankshaft from a Deutz R BV8M545 Engine

Spare used crankshaft from a Deutz R BV8M545 Engine

SPARE USED DEUTZ CRANKSHAFT

We have in stock at our warehouse in Sharjah U. A. E. a spare used crankshaft from a

Deutz R BV8M545 Engine.

This shaft has been inspected by SGS and certified to be in sound serviceable condition.

The details of the Crankshaft are as follows:

Crankshaft for Deutz Marine Engine.

Type : BV8M 545 is from the engine 2 999 533-540.

Original part no 02912760 for engines up to 50% turbo charged,

Which is duly inspected by SGS India Ltd.

The SGS inspection report details are as follows:

1. Markings:

46 - 1548 (ME) (ME)

41398 DEUTZ

518

BV 895

27.5.60

267470 Z1 N11 152 N

A

2) Measurements

i) Dia. of Journal (A) 219.92 to 219.97 mm

ii) Dia. of Journal (B) 219.89 to 219.96 mm

iii) Dia. Of Crank Pin (A) 209.92 to 209.96mm

iv) Dia. Of Crank Pin (B) 209.91 to 209.97mm

v) Crank Pin width (without bearing) 132 mm



3. Alignment of the shaft found straight.

4. The dimensions found standard and not machined.

5. Acceptable minimum scoring marking on pins.

6. All pins were polished and good order.

7.Ultrasonic test, particularly on journals and pins.

The results of inspection were satisfactory.

If of interest please contact me at the above address by e-mail, fax, phone or mobile.


SPARES

SPARES


VALVES